電漿增進PDMS與導電膠體附著性之研究| NTU Scholars
文章推薦指數: 80 %
Abstract: 本研究使用大氣電漿改質疏水性聚二甲基矽氧烷(PDMS)表面製備印刷軟性導電薄膜。
近年 ...
Skipnavigation
NTUScholars
工學院
化學工程學系
Pleaseusethisidentifiertociteorlinktothisitem:
https://scholars.lib.ntu.edu.tw/handle/123456789/65980
Title: 電漿增進PDMS與導電膠體附著性之研究AdhesionEnhancementofPDMSSurfaceforStretchablePrintedConductiveTrackswithAtmosphericPlasmaTreatment
Authors: 李俊毅Li,Chun-Yi
Keywords: 黏著力;大氣電漿;導電薄膜;聚二甲基矽氧烷;印刷可拉伸式電子元件;adhesion;stretchableelectronics;conductivethinfilm;PDMS;atmosphericplasmatreatment;flexibleprintedelectronics
IssueDate: 2016
Abstract: 本研究使用大氣電漿改質疏水性聚二甲基矽氧烷(PDMS)表面製備印刷軟性導電薄膜。
近年來,軟性電子元件受到廣大的矚目,其中又以聚二甲基矽氧烷(PDMS)最受矚目,但疏水性的表面限制其應用性,因此本文利用大氣電漿處理氧化PDMS表面,製造一層親水性二氧化矽表面層,改善其疏水性質,並用XPS及AFM證實其二氧化矽層存在的特性。
此外,本文中改變大氣電漿操作參數,如氣體種類、電漿功率及掃描次數,以獲得親水時效性最長的二氧化矽層的表面。
再將商用導電銀膠利用網版印刷方式印刷於大氣電漿處理過的PDMS表面上,以製造可拉伸式且高黏著性導電薄膜。
由於導電銀膠中的環氧樹脂和二氧化矽表面層之間的強結合力的結果,在PDMS上印刷圖案經過多種的附著力試驗均完好無損,表現出了良好的附著力,彎曲,扭轉,和拉伸條件印刷導電薄膜顯示出良好的導電性能,展現強大的機械穩定性。
最後,我們印刷導電薄膜應用至壓力感測器,展現出良好的靈敏度和快速響應時間。
本研究提出的大氣電漿改質PDMS表面具有簡單與方便之特性,可應用於多種塗佈或印刷製程前處理,來增加印刷膠體與疏水性基材的黏著性。
Inthisstudy,aneffectiveplasmatreatmentmethodwasdevelopedtomodifypolydimethylsiloxane(PDMS)surfacetoenhancetheadhesionofprintedconductivethinfilms.Aftertheplasmatreatment,asilica-likesurfacelayer,whichwasconfirmedwithXPSresults,wasformedonthePDMSsurfaceandresultedinadrasticdecreaseinwatercontactangle.ThesilicalayerdisappearedafterafewhoursandthetreatedPDMSsurfacerecoveredithydrophobicity.Effectsofgasandplasmapowersonthetransientcontactangledecreaseswerecarefullyexaminedtoextendthelifetimeofthesurfacesilicalayers.Conductiveinkwithepoxyresinwasscreen-printedontheplasma-treatedPDMSsurface.Theprintedpatternsshowedgoodadhesion,asaresultofthestrongbindingbetweenepoxyresinandthesilicasurfacelayer,andcansustainwellintapeandsonicationtests.Bendingandstretchingtestswerealsoperformedtotestthestabilityoftheprintedtracks.Finally,printedpressuresensorswithgoodsensitivityandfastresponsetimeswerefabricatedtodemonstratethecapabilityofapplyingthismethodfortherealizationofprintedelectricdevices.
URI: http://ntur.lib.ntu.edu.tw//handle/246246/271856
DOI: 10.6342/NTU201600925
Rights: 論文公開時間:2021/7/26論文使用權限:同意有償授權(權利金給回饋學校)
AppearsinCollections:化學工程學系
FilesinThisItem:
File
Description
SizeFormat
ntu-105-R03524044-1.pdf23.54kBAdobePDFView/Open
Showfullitemrecord
Pageview(s)
1
253
checkedonJan15,2021
Download(s)
1
72
checkedonJan15,2021
GoogleScholarTM
Check
Altmetric
Altmetric
RelatedItemsinTAIR
ItemsinDSpaceareprotectedbycopyright,withallrightsreserved,unlessotherwiseindicated.
延伸文章資訊
- 1聚二甲基矽氧烷混成水膠薄膜之改質及其眼科性質之探討
在本論文的第一部分,將PDMS-HEMA,利用氧電漿活化表面,進行丙烯酸接枝,於膜表面產生-COO-基團,然後利用幾丁聚醣(chitosan,CS)與透明質酸(hyaluronic acid,H...
- 2微結構疏水性表面製作與表面特性之研究 - 國立中山大學
另外再將表面進行氧氣電漿處理,會使PDMS. 變為親水性,探討親水性表面結構的接觸角變化。 關鍵字: 聚二甲基矽氧烷、疏水性、蓮葉效應、翻模轉印法、接觸角、微結構 ...
- 3電漿增進PDMS與導電膠體附著性之研究| NTU Scholars
Abstract: 本研究使用大氣電漿改質疏水性聚二甲基矽氧烷(PDMS)表面製備印刷軟性導電薄膜。近年 ...
- 4[問題] 氧電漿黏合玻璃跟pdms問題- 看板NEMS - 批踢踢實業坊
裝置是將玻璃與塗佈PDMS的玻片黏合製成以前用電漿打45-55秒就可以黏的很好放上去時就會很快黏合最近卻幾乎都無法黏合打完電漿,把玻璃放上PDMS.
- 5國立交通大學機械工程學系
另外,. PDMS 作接合時,不需接著劑黏合或陽極接合時需高溫高電壓,只需. Page 31. 11. 於其表面作氧電漿氧化處理,藉由鍵結作接合[28]。聚二甲基矽氧烷. (PDMS),表面性質...