PDMS
po文清單文章推薦指數: 80 %
關於「PDMS」標籤,搜尋引擎有相關的訊息討論:
PDMS mixed‐matrix membranes with molecular fillers via reactive ...2020年6月14日 · Abstract Mixed-matrix membrane (MMM) consisting of fillers in polymeric matrix offers a promising approach to develop high-performance ...Plastic–PDMS bonding for high pressure hydrolytically stable active ...Stoeber , The effect of adhesion promoter on the adhesion of PDMS to different substrate materials, Lab on a Chip, 2009, 10.1039/b813757a RSC . C. Li and G. L. ... tw | twDr Ghanshyam L Jadav - Google 學術搜尋Influence of film thickness on the structure and properties of PDMS membrane. GL Jadav, VK Aswal, H Bhatt, JC Chaudhari, PS Singh.Fabrication of Polydimethysiloxane (PDMS) Dense Layer on ... - NCBI2021年2月28日 · The composite hollow-fiber membrane prepared from 15 wt% PDMS solution ... data curation, G.L. and W.K.; formal analysis, G.L., K.K., J.K., ... tw | twTunable microlens array fabricated by a silicone oil-induced swelled ...2020年9月21日 · Department of Mechanical Engineering, National Taiwan University of ... chains in low-viscosity oils diffused more readily into the PDMS ...Replication and leakage test of polydimethylsiloxane (PDMS ...2019年1月25日 · In this work, PDMS microfluidics channel replication from SU-8 mold was ... G. L. Williams, R. McWilliam, A. Maiden, A. Purvis, P. A. Ivey, ... tw | twPVA-PDMS-Stearic acid composite nanofibrous mats with improved ...2018年10月30日 · Beyond this optimal PDMS fraction, the mechanical properties of the ... 1(a–f) at lower magnification; and g-l at higher magnification), ...PAL3 SPME Arrow & SPME Fiber - GL SciencesSFIB-C-WR-95/10-P1, Smart SPME fiber C-WR/PDMS (Carbon Wide Range / Polydimethylsiloxane) Fiber thickness 95µm, Fiber length 10mm color code: dark blue, ...Methods in Bioengineering: Biomicrofabrication and Biomicrofluidics[103] Galambos P., Benavides G. L., ... Chang-Yen D. A., and Gale, B. K., “Characterization of Interconnects Used in PDMS Microfluidic Systems,” Journal of ...Advances in Optofluidics... R. A hybrid silicon-pdms optofluidic platform for sensing applications. ... J.; Johnson, T.W.; Oh, S.H. Dielectrophoresis-enhanced plasmonic sensing ...
延伸文章資訊
- 1國立交通大學機械工程學系
另外,. PDMS 作接合時,不需接著劑黏合或陽極接合時需高溫高電壓,只需. Page 31. 11. 於其表面作氧電漿氧化處理,藉由鍵結作接合[28]。聚二甲基矽氧烷. (PDMS),表面性質...
- 2微結構疏水性表面製作與表面特性之研究 - 國立中山大學
另外再將表面進行氧氣電漿處理,會使PDMS. 變為親水性,探討親水性表面結構的接觸角變化。 關鍵字: 聚二甲基矽氧烷、疏水性、蓮葉效應、翻模轉印法、接觸角、微結構 ...
- 3電漿增進PDMS與導電膠體附著性之研究| NTU Scholars
Abstract: 本研究使用大氣電漿改質疏水性聚二甲基矽氧烷(PDMS)表面製備印刷軟性導電薄膜。近年 ...
- 4聚二甲基矽氧烷混成水膠薄膜之改質及其眼科性質之探討
在本論文的第一部分,將PDMS-HEMA,利用氧電漿活化表面,進行丙烯酸接枝,於膜表面產生-COO-基團,然後利用幾丁聚醣(chitosan,CS)與透明質酸(hyaluronic acid,H...
- 5[問題] 氧電漿黏合玻璃跟pdms問題- 看板NEMS - 批踢踢實業坊
裝置是將玻璃與塗佈PDMS的玻片黏合製成以前用電漿打45-55秒就可以黏的很好放上去時就會很快黏合最近卻幾乎都無法黏合打完電漿,把玻璃放上PDMS.